 "Is life unBEARable cause you can't get up and ride?" |
Contact Gail DeWitt, Owner, Consultant Phone: 941-723-9817 | Cell 941-932-6890 E-mail Gail Eastern Standard Time Hours: Monday - Friday = 9am - 5pm Saturday = 9am - 12noon |
| Home Page | About Gail | Solutions We Offer | Helpful Resources |
Care, Maintenance and Medical Tax Info PLEASE READ THIS INFORMATION IMMEDIATELY AFTER INSTALL Dear Purchaser, Thanks for your purchase. The Kliktronic comes with: a 1 year warranty from the manufacturer, Kliktronic of England, provided that the install was done properly and the entire original piece is returned in tact and there is no damage to the wiring harness from rubbing, cuts, etc. This warranty starts from the date of purchase, not the date of install. HOW TO MAINTAIN YOUR KLIKTRONIC: 1. After installation, and you are satisfied that it is working properly, please mark the actuator, where the aluminum collar is centered, perhaps with a magic marker, this marks the optimum throw of 1' up and 1' down. If you push the buttons up or down and they do not put you into the next gear, most likely it is out of alignment and you will be able to realign it yourself. Do NOT keep pushing them. Buy and carry a 5.5 metric allen wrench with you while riding. Insert the wrench into the opening of the aluminum collar and slightly loosen it. Slide the actuator solenoid only/16th. of an inch, and retighten. See if this corrects the problem. If not, loosen the collar again, and move it back to the original location. Then move it down 1/16th. of an inch and try it again. If this does not correct the situation, you may want to check the Faultfinding Electrical Flow Chart and see if you can trace the problem using the chart provided, or return to the installer for service. 2. On the first of every month, wipe the actuator rod that connects to the shifter pedal, with a clean cloth. 3. Apply a thin coating of WD 40 spray to the shaft. 4. At the same time, check that the Klikronic is not loose anywhere. Generally the only time it moves slightly, is when you activate a shift but the mounting places need to be tight. If something is loose, please use a bit of a lock type coating to keep the screws tight, the nuts secured, and tight also. If you regularly follow the above guidelines, you should have many years of pleasurable riding. In case of Qs: email to: disabledmotorcycleriders@msn.com website: www.disabledmotorcyclerider.com phone: 941-723-9817 hours M-F 9-5 EST--S 9-12 If no answer, please leave your name, number and message, and I will get back to you ASAP. FYI********************************************** If you are disabled, anything you purchase, or do, to maintain your motorcycle adaptations, may be taken off the current Schedule A Income Tax form provided that you have: a medical prescription from your doctor, that is dated before your purchase. that states: your full name, product description or product name, and any maintained costs states that this is a MEDICAL NECESSITY for you. Make a copy of the script, and keep on file. Send a copy to the IRS to verify that this is a durable medical goods. File the charges on Schedule A of your 1040 for the year of purchase. Repairs and upkeep can also be filed as needed. Generally, your insurance will not the cover the costs of anything you purchase. You CAN NOT take the price of the motorcycle off your Income Tax.
|